Does anyone have ANY idea what this is?

What was this used for? - PHOTO REQUIRED
Post Reply
Silversurfer23
Posts: 1
Joined: Wed Feb 27, 2013 9:29 pm

Does anyone have ANY idea what this is?

Post by Silversurfer23 »

Hi, so I purchased this at an estate auction and have no idea what it is. I'm pretty sure the center piece is silver but not the outside piece. It seems to be completely hand made and has no markings of any kind other than the design on the center piece. The top is a hinged lid that when open allows you to take the center piece out.   It's roughly 5" tall x 5" wide x 7" long. The center piece weighs probably at least 20 ounces and the outside piece about double that. 


Image
The item in its entirety. 

Image
Just the center piece that I believe to be silver. The uneven top shows that it wasn't perfect and leads me to believe it was all one strip and also handmade. 

Image
The design on the center piece. There's 6 of these going all the way around. If you look closely you can tell that it was created using a chisel and hammer. Even the rounded parts you can tell were made using very small chisel strikes. The tarnished part on each side of the design are from where it sits inside of the outter piece. 

Image
This is to me where it looks like it was melded together after all the design work had been done.  It definitely looks like a crease where the two ends of the once flat single piece of metal were joined together. 

Image
The bottom of the center piece. So strange to me that there is not a single makers mark or identifying mark. 

Image
The inside of the center piece. 

Image
The outside piece sitting upright. I don't believe this to be silver. It seems too heavy/dense/solid to be silver. 

Image
The outside piece laying on its side lid open. 


Image
Outside piece to show design of pillars and how it was soldered together. 

Image
Top down view of the lid of the outside piece. 

Image
Hinge of outside piece lid.
agphile
contributor
Posts: 413
Joined: Mon Nov 30, 2009 12:18 pm
Location: UK

Re: Does anyone have ANY idea what this is?

Post by agphile »

I can't say what was kept in it, but it looks to me very much as if there was originally a glass or ceramic centre insert which got broken. The silver insert will have been made as a replacement.
Silver and Gold
Posts: 1
Joined: Thu Feb 28, 2013 11:40 am

Re: Does anyone have ANY idea what this is?

Post by Silver and Gold »

Is holder column piece old, does anyone know age of either piece ?
oel
co-admin
Posts: 5329
Joined: Wed Mar 21, 2007 8:16 pm
Location: Rotterdam
Contact:

Re: Does anyone have ANY idea what this is?

Post by oel »

Hi welcome to the forum,

If we believe it to be silver plated, it must have been made after the invention and practice of silver plating, not earlier than 1840 see:
http://www.925-1000.com/forum/viewtopic ... 38&t=21429
If it is a Georgian revival piece it could have been made last quarter 19th century towards the turn of the 19th century.

Best,

Oel
Post Reply

Return to “Mystery Objects”